( This is a "repackaged" version of a very old web site I did
about
some projects to my old Santana 2023C sailboat)
Galley:
Stove
-
- The stove I use is one of those tabletop butane versions. The boat store sells a Kenyon or similar for close to sixty dollars. I found an EXACT duplicate at a store called Northern Hydraulics (800-533-5545) for only 32 dollars! Their butane cannisters are much cheaper too.
-
- In these pictures you can see the stove and the storage hole/shelf. I cut the hole in bulkhead using four 1 inch holes drilled in the corners and then cutting the straight lines. I put a shelf inside with little side walls to keep the stove from falling out. The shelf is mounted just lower than the cutout so that there is a lip at the front edge.
- In these pictures you can see the stove and the storage hole/shelf. I cut the hole in bulkhead using four 1 inch holes drilled in the corners and then cutting the straight lines. I put a shelf inside with little side walls to keep the stove from falling out. The shelf is mounted just lower than the cutout so that there is a lip at the front edge.
|
| ||
|
web design by: 
|
All material,
text, and graphics copyright 2001, 2002 RCHDesigns. No part of this web page may be copied without the written permission of the author. email here |
at home in:  |